sleap.nn.config.model

Contents

sleap.nn.config.model#

class sleap.nn.config.model.BackboneConfig(*args, **kwargs)[source]#

Configurations related to the model backbone.

Only one field can be set and will determine which backbone architecture to use.

leap#

A LEAPConfig instance.

Type:

sleap.nn.config.model.LEAPConfig | None

unet#

A UNetConfig instance.

Type:

sleap.nn.config.model.UNetConfig | None

hourglass#

A HourglassConfig instance.

Type:

sleap.nn.config.model.HourglassConfig | None

resnet#

A ResNetConfig instance.

Type:

sleap.nn.config.model.ResNetConfig | None

class sleap.nn.config.model.CenteredInstanceConfmapsHeadConfig(anchor_part: str | None = None, part_names: List[str] | None = None, sigma: float = 5.0, output_stride: int = 1, loss_weight: float = 1.0, offset_refinement: bool = False)[source]#

Configurations for centered instance confidence map heads.

These heads are used in topdown multi-instance models that make the assumption that there is an instance reliably centered in the cropped input image. These heads are useful when centroids are easy to detect as they learn complex relationships between the geometry of body parts, even when animals are occluded.

This comes at the cost of a strong reliance on the accuracy of the instance-centered cropping, i.e., it is heavily limited by the accuracy of the centroid model.

Additionally, since one image crop is evaluated per instance, topdown models scale linearly with the number of animals in the frame, which can result in poor performance when many instances are present.

Use this head when centroids are easy to detect, preferably using a consistent body part as an anchor, and when there are few animals that cover a small region of the full frame.

anchor_part#

Text name of a body part (node) to use as the anchor point. If None, the midpoint of the bounding box of all visible instance points will be used as the anchor. The bounding box midpoint will also be used if the anchor part is specified but not visible in the instance. Setting a reliable anchor point can significantly improve topdown model accuracy as they benefit from a consistent geometry of the body parts relative to the center of the image.

Type:

str | None

part_names#

Text name of the body parts (nodes) that the head will be configured to produce. The number of parts determines the number of channels in the output. If not specified, all body parts in the skeleton will be used.

Type:

List[str] | None

sigma#

Spread of the Gaussian distribution of the confidence maps as a scalar float. Smaller values are more precise but may be difficult to learn as they have a lower density within the image space. Larger values are easier to learn but are less precise with respect to the peak coordinate. This spread is in units of pixels of the model input image, i.e., the image resolution after any input scaling is applied.

Type:

float

output_stride#

The stride of the output confidence maps relative to the input image. This is the reciprocal of the resolution, e.g., an output stride of 2 results in confidence maps that are 0.5x the size of the input. Increasing this value can considerably speed up model performance and decrease memory requirements, at the cost of decreased spatial resolution.

Type:

int

loss_weight#

Scalar float used to weigh the loss term for this head during training. Increase this to encourage the optimization to focus on improving this specific output in multi-head models.

Type:

float

offset_refinement#

If True, model will also output an offset refinement map used to achieve subpixel localization of peaks during inference. This can improve the localization accuracy of the model at the cost of additional memory and training and inference time. If False (the default), subpixel localization can be achieved post-hoc with deterministic refinement, which does not require additional resources or training, but may not achieve the same accuracy as learned refinement.

Type:

bool

class sleap.nn.config.model.CentroidsHeadConfig(anchor_part: str | None = None, sigma: float = 5.0, output_stride: int = 1, loss_weight: float = 1.0, offset_refinement: bool = False)[source]#

Configurations for centroid confidence map heads.

These heads are used in topdown models that rely on centroid detection to detect instances for cropping before predicting the remaining body parts.

Multiple centroids can be present (one per instance), so their coordinates can be recovered in inference via local peak finding.

anchor_part#

Text name of a body part (node) to use as the anchor point. If None, the midpoint of the bounding box of all visible instance points will be used as the anchor. The bounding box midpoint will also be used if the anchor part is specified but not visible in the instance. Setting a reliable anchor point can significantly improve topdown model accuracy as they benefit from a consistent geometry of the body parts relative to the center of the image.

Type:

str | None

sigma#

Spread of the Gaussian distribution of the confidence maps as a scalar float. Smaller values are more precise but may be difficult to learn as they have a lower density within the image space. Larger values are easier to learn but are less precise with respect to the peak coordinate. This spread is in units of pixels of the model input image, i.e., the image resolution after any input scaling is applied.

Type:

float

output_stride#

The stride of the output confidence maps relative to the input image. This is the reciprocal of the resolution, e.g., an output stride of 2 results in confidence maps that are 0.5x the size of the input. Increasing this value can considerably speed up model performance and decrease memory requirements, at the cost of decreased spatial resolution.

Type:

int

loss_weight#

Scalar float used to weigh the loss term for this head during training. Increase this to encourage the optimization to focus on improving this specific output in multi-head models.

Type:

float

offset_refinement#

If True, model will also output an offset refinement map used to achieve subpixel localization of peaks during inference. This can improve the localization accuracy of the model at the cost of additional memory and training and inference time. If False (the default), subpixel localization can be achieved post-hoc with deterministic refinement, which does not require additional resources or training, but may not achieve the same accuracy as learned refinement.

Type:

bool

class sleap.nn.config.model.ClassMapsHeadConfig(classes: List[str] | None = None, sigma: float = 5.0, output_stride: int = 1, loss_weight: float = 1.0)[source]#

Configurations for class map heads.

These heads are used in bottom-up multi-instance models that classify detected points using a fixed set of learned classes (e.g., animal identities).

Class maps are an image-space representation of the probability of that each class occupies a given pixel. This is similar to semantic segmentation, however only the pixels in the neighborhood of the landmarks have a class assignment.

classes#

List of string names of the classes that this head will predict.

Type:

List[str] | None

sigma#

Spread of the Gaussian distribution that determines the neighborhood that the class maps will be nonzero around each landmark.

Type:

float

output_stride#

The stride of the output class maps relative to the input image. This is the reciprocal of the resolution, e.g., an output stride of 2 results in maps that are 0.5x the size of the input. This should be the same size as the confidence maps they are associated with.

Type:

int

loss_weight#

Scalar float used to weigh the loss term for this head during training. Increase this to encourage the optimization to focus on improving this specific output in multi-head models.

Type:

float

class sleap.nn.config.model.ClassVectorsHeadConfig(classes: List[str] | None = None, num_fc_layers: int = 1, num_fc_units: int = 64, global_pool: bool = True, output_stride: int = 1, loss_weight: float = 1.0)[source]#

Configurations for class vectors heads.

These heads are used in top-down multi-instance models that classify detected points using a fixed set of learned classes (e.g., animal identities).

Class vectors represent the probability that the image is associated with each of the specified classes. This is similar to a standard classification task.

classes#

List of string names of the classes that this head will predict.

Type:

List[str] | None

num_fc_layers#

Number of fully-connected layers before the classification output layer. These can help in transforming general image features into classification-specific features.

Type:

int

num_fc_units#

Number of units (dimensions) in the fully-connected layers before classification. Increasing this can improve the representational capacity in the pre-classification layers.

Type:

int

output_stride#

The stride of the output class maps relative to the input image. This is the reciprocal of the resolution, e.g., an output stride of 2 results in maps that are 0.5x the size of the input. This should be the same size as the confidence maps they are associated with.

Type:

int

loss_weight#

Scalar float used to weigh the loss term for this head during training. Increase this to encourage the optimization to focus on improving this specific output in multi-head models.

Type:

float

class sleap.nn.config.model.HeadsConfig(*args, **kwargs)[source]#

Configurations related to the model output head type.

Only one attribute of this class can be set, which defines the model output type.

single_instance#

An instance of SingleInstanceConfmapsHeadConfig.

Type:

sleap.nn.config.model.SingleInstanceConfmapsHeadConfig | None

centroid#

An instance of CentroidsHeadConfig.

Type:

sleap.nn.config.model.CentroidsHeadConfig | None

centered_instance#

An instance of CenteredInstanceConfmapsHeadConfig.

Type:

sleap.nn.config.model.CenteredInstanceConfmapsHeadConfig | None

multi_instance#

An instance of MultiInstanceConfig.

Type:

sleap.nn.config.model.MultiInstanceConfig | None

multi_class_bottomup#

An instance of MultiClassBottomUpConfig.

Type:

sleap.nn.config.model.MultiClassBottomUpConfig | None

multi_class_topdown#

An instance of MultiClassTopDownConfig.

Type:

sleap.nn.config.model.MultiClassTopDownConfig | None

class sleap.nn.config.model.HourglassConfig(stem_stride: int = 4, max_stride: int = 64, output_stride: int = 4, stem_filters: int = 128, filters: int = 256, filter_increase: int = 128, stacks: int = 3)[source]#

Hourglass backbone configuration.

stem_stride#

Controls how many stem blocks to use for initial downsampling. These are useful for learned downsampling that is able to retain spatial information while reducing large input image sizes.

Type:

int

max_stride#

Determines the number of downsampling blocks in the network, increasing receptive field size at the cost of network size.

Type:

int

output_stride#

Determines the number of upsampling blocks in the network.

Type:

int

filters#

Base number of filters in the network.

Type:

int

filters_increase#

Constant to increase the number of filters by at each block.

stacks#

Number of repeated stacks of the network (excluding the stem).

Type:

int

class sleap.nn.config.model.LEAPConfig(max_stride: int = 8, output_stride: int = 1, filters: int = 64, filters_rate: float = 2, up_interpolate: bool = False, stacks: int = 1)[source]#

LEAP backbone configuration.

max_stride#

Determines the number of downsampling blocks in the network, increasing receptive field size at the cost of network size.

Type:

int

output_stride#

Determines the number of upsampling blocks in the network.

Type:

int

filters#

Base number of filters in the network.

Type:

int

filters_rate#

Factor to scale the number of filters by at each block.

Type:

float

up_interpolate#

If True, use bilinear upsampling instead of transposed convolutions for upsampling. This can save computations but may lower overall accuracy.

Type:

bool

stacks#

Number of repeated stacks of the network (excluding the stem).

Type:

int

class sleap.nn.config.model.ModelConfig(backbone: BackboneConfig = NOTHING, heads: HeadsConfig = NOTHING, base_checkpoint: str | None = None)[source]#

Configurations related to model architecture.

backbone#

Configurations related to the main network architecture.

Type:

sleap.nn.config.model.BackboneConfig

heads#

Configurations related to the output heads.

Type:

sleap.nn.config.model.HeadsConfig

base_checkpoint#

Path to model folder for loading a checkpoint. Should contain the .h5 file

Type:

str | None

class sleap.nn.config.model.MultiClassBottomUpConfig(confmaps: MultiInstanceConfmapsHeadConfig = NOTHING, class_maps: ClassMapsHeadConfig = NOTHING)[source]#

Configuration for multi-instance confidence map and class map models.

This configuration specifies a multi-head model that outputs both multi-instance confidence maps and class maps, which together enable multi-instance pose tracking in a bottom-up fashion, i.e., no instance cropping, centroids or PAFs are required. The limitation with this approach is that the classes, e.g., animal identities, must be labeled in the training data and cannot be generalized beyond those classes. This is still useful for applications in which the animals are uniquely identifiable and tracking their identities at inference time is critical, e.g., for closed loop experiments.

confmaps#

Part confidence map configuration (see the description in MultiInstanceConfmapsHeadConfig).

Type:

sleap.nn.config.model.MultiInstanceConfmapsHeadConfig

class_maps#

Class map configuration (see the description in ClassMapsHeadConfig).

Type:

sleap.nn.config.model.ClassMapsHeadConfig

class sleap.nn.config.model.MultiClassTopDownConfig(confmaps: CenteredInstanceConfmapsHeadConfig = NOTHING, class_vectors: ClassVectorsHeadConfig = NOTHING)[source]#

Configuration for centered-instance confidence map and class map models.

This configuration specifies a multi-head model that outputs both centered-instance confidence maps and class vectors, which together enable multi-instance pose tracking in a top-down fashion, i.e., instance-centered crops followed by pose estimation and classification.

The limitation with this approach is that the classes, e.g., animal identities, must be labeled in the training data and cannot be generalized beyond those classes. This is still useful for applications in which the animals are uniquely identifiable and tracking their identities at inference time is critical, e.g., for closed loop experiments.

confmaps#

Part confidence map configuration (see the description in CenteredInstanceConfmapsHeadConfig).

Type:

sleap.nn.config.model.CenteredInstanceConfmapsHeadConfig

class_vectors#

Class map configuration (see the description in ClassVectorsHeadConfig).

Type:

sleap.nn.config.model.ClassVectorsHeadConfig

class sleap.nn.config.model.MultiInstanceConfig(confmaps: MultiInstanceConfmapsHeadConfig = NOTHING, pafs: PartAffinityFieldsHeadConfig = NOTHING)[source]#

Configuration for combined multi-instance confidence map and PAF model heads.

This configuration specifies a multi-head model that outputs both multi-instance confidence maps and part affinity fields, which together enable multi-instance pose estimation in a bottom-up fashion, i.e., no instance cropping or centroids are required.

confmaps#

Part confidence map configuration (see the description in MultiInstanceConfmapsHeadConfig).

Type:

sleap.nn.config.model.MultiInstanceConfmapsHeadConfig

pafs#

Part affinity fields configuration (see the description in PartAffinityFieldsHeadConfig).

Type:

sleap.nn.config.model.PartAffinityFieldsHeadConfig

class sleap.nn.config.model.MultiInstanceConfmapsHeadConfig(part_names: List[str] | None = None, sigma: float = 5.0, output_stride: int = 1, loss_weight: float = 1.0, offset_refinement: bool = False)[source]#

Configurations for multi-instance confidence map heads.

These heads are used in bottom-up multi-instance models that do not make any assumption about the connectivity of the body parts. These heads will generate multiple local peaks for each body part type and must be detected using local peak finding.

Although this head alone is sufficient to detect multiple copies of each body part type, it provides no information as to which sets of points should be grouped together to the same instance. If this is required, a head that provides connectivity or grouping information is required, e.g., part affinity fields.

Use this head when multiple instances of each body part are present and do not need to be grouped or will be grouped using additional information.

This head type has the advantage that it only needs to evaluate each frame once to find all peaks, in contrast to topdown models that must be evaluated for each crop. This constant scaling with the number of instances can be especially beneficial when there are many animals present in the frame.

part_names#

Text name of the body parts (nodes) that the head will be configured to produce. The number of parts determines the number of channels in the output. If not specified, all body parts in the skeleton will be used.

Type:

List[str] | None

sigma#

Spread of the Gaussian distribution of the confidence maps as a scalar float. Smaller values are more precise but may be difficult to learn as they have a lower density within the image space. Larger values are easier to learn but are less precise with respect to the peak coordinate. This spread is in units of pixels of the model input image, i.e., the image resolution after any input scaling is applied.

Type:

float

output_stride#

The stride of the output confidence maps relative to the input image. This is the reciprocal of the resolution, e.g., an output stride of 2 results in confidence maps that are 0.5x the size of the input. Increasing this value can considerably speed up model performance and decrease memory requirements, at the cost of decreased spatial resolution.

Type:

int

loss_weight#

Scalar float used to weigh the loss term for this head during training. Increase this to encourage the optimization to focus on improving this specific output in multi-head models.

Type:

float

offset_refinement#

If True, model will also output an offset refinement map used to achieve subpixel localization of peaks during inference. This can improve the localization accuracy of the model at the cost of additional memory and training and inference time. If False (the default), subpixel localization can be achieved post-hoc with deterministic refinement, which does not require additional resources or training, but may not achieve the same accuracy as learned refinement.

Type:

bool

class sleap.nn.config.model.PartAffinityFieldsHeadConfig(edges: Sequence[Tuple[str, str]] | None = None, sigma: float = 15.0, output_stride: int = 1, loss_weight: float = 1.0)[source]#

Configurations for multi-instance part affinity field heads.

These heads are used in bottom-up multi-instance models that require information about body part connectivity in order to group multiple detections of each body part type into distinct instances.

Part affinity fields are an image-space representation of the directed graph that defines the skeleton. Pixels that are close to the line (directed edge) formed between pairs of nodes of the same instance will contain unit vectors pointing along the direction of the the connection. The similarity between this line and the average of the unit vectors at the pixels underneath the line can be used as a matching score to associate candidate pairs of body part detections.

Use this head when multiple instances of each body part are present and need to be grouped to coherent instances.

This head type has the advantage that it only needs to evaluate each frame once to find all peaks, in contrast to topdown models that must be evaluated for each crop. This constant scaling with the number of instances can be especially beneficial when there are many animals present in the frame.

edges#

List of 2-tuples of the form (source_node, destination_node) that define pairs of text names of the directed edges of the graph. If not set, all edges in the skeleton will be used.

Type:

Sequence[Tuple[str, str]] | None

sigma#

Spread of the Gaussian distribution that weigh the part affinity fields as a function of their distance from the edge they represent. Smaller values are more precise but may be difficult to learn as they have a lower density within the image space. Larger values are easier to learn but are less precise with respect to the edge distance, so can be less useful in disambiguating between edges that are nearby and parallel in direction. This spread is in units of pixels of the model input image, i.e., the image resolution after any input scaling is applied.

Type:

float

output_stride#

The stride of the output part affinity fields relative to the input image. This is the reciprocal of the resolution, e.g., an output stride of 2 results in PAFs that are 0.5x the size of the input. Increasing this value can considerably speed up model performance and decrease memory requirements, at the cost of decreased spatial resolution.

Type:

int

loss_weight#

Scalar float used to weigh the loss term for this head during training. Increase this to encourage the optimization to focus on improving this specific output in multi-head models.

Type:

float

class sleap.nn.config.model.PretrainedEncoderConfig(encoder: str = 'efficientnetb0', pretrained: bool = True, decoder_filters: int = 256, decoder_filters_rate: float = 1.0, output_stride: int = 2, decoder_batchnorm: bool = True)[source]#

Configuration for UNet backbone with pretrained encoder.

encoder#

Name of the network architecture to use as the encoder. Valid encoder names are: - "vgg16", "vgg19", - "resnet18", "resnet34", "resnet50", "resnet101", "resnet152" - "resnext50", "resnext101" - "inceptionv3", "inceptionresnetv2" - "densenet121", "densenet169", "densenet201" - "seresnet18", "seresnet34", "seresnet50", "seresnet101", "seresnet152",

"seresnext50", "seresnext101", "senet154"

  • "mobilenet", "mobilenetv2"

  • "efficientnetb0", "efficientnetb1", "efficientnetb2", "efficientnetb3", "efficientnetb4", "efficientnetb5", "efficientnetb6", "efficientnetb7"

Defaults to "efficientnetb0".

Type:

str

pretrained#

If True, use initialized with weights pretrained on ImageNet.

Type:

bool

decoder_filters#

Base number of filters for the upsampling blocks in the decoder.

Type:

int

decoder_filters_rate#

Factor to scale the number of filters by at each consecutive upsampling block in the decoder.

Type:

float

output_stride#

Stride of the final output.

Type:

int

decoder_batchnorm#

If True (the default), use batch normalization in the decoder layers.

Type:

bool

class sleap.nn.config.model.ResNetConfig(version: str = 'ResNet50', weights: str = 'frozen', upsampling: UpsamplingConfig | None = None, max_stride: int = 32, output_stride: int = 4)[source]#

ResNet backbone configuration.

version#

Name of the ResNetV1 variant. Can be one of: “ResNet50”, “ResNet101”, or “ResNet152”.

Type:

str

weights#

Controls how the network weights are initialized. If “random”, the network is not pretrained. If “frozen”, the network uses pretrained weights and keeps them fixed. If “tunable”, the network uses pretrained weights and allows them to be trainable.

Type:

str

upsampling#

A UpsamplingConfig that defines an upsampling branch if not None.

Type:

sleap.nn.config.model.UpsamplingConfig | None

max_stride#

Stride of the backbone feature activations. These should be <= 32.

Type:

int

output_stride#

Stride of the final output. If the upsampling branch is not defined, the output stride is controlled via dilated convolutions or reduced pooling in the backbone.

Type:

int

class sleap.nn.config.model.SingleInstanceConfmapsHeadConfig(part_names: List[str] | None = None, sigma: float = 5.0, output_stride: int = 1, loss_weight: float = 1.0, offset_refinement: bool = False)[source]#

Configurations for single instance confidence map heads.

These heads are used in single instance models that make the assumption that only one of each body part is present in the image. These heads produce confidence maps with a single peak for each part type which can be detected via global peak finding.

Do not use this head if there is more than one animal present in the image.

part_names#

Text name of the body parts (nodes) that the head will be configured to produce. The number of parts determines the number of channels in the output. If not specified, all body parts in the skeleton will be used.

Type:

List[str] | None

sigma#

Spread of the Gaussian distribution of the confidence maps as a scalar float. Smaller values are more precise but may be difficult to learn as they have a lower density within the image space. Larger values are easier to learn but are less precise with respect to the peak coordinate. This spread is in units of pixels of the model input image, i.e., the image resolution after any input scaling is applied.

Type:

float

output_stride#

The stride of the output confidence maps relative to the input image. This is the reciprocal of the resolution, e.g., an output stride of 2 results in confidence maps that are 0.5x the size of the input. Increasing this value can considerably speed up model performance and decrease memory requirements, at the cost of decreased spatial resolution.

Type:

int

loss_weight#

Scalar float used to weigh the loss term for this head during training. Increase this to encourage the optimization to focus on improving this specific output in multi-head models.

Type:

float

offset_refinement#

If True, model will also output an offset refinement map used to achieve subpixel localization of peaks during inference. This can improve the localization accuracy of the model at the cost of additional memory and training and inference time. If False (the default), subpixel localization can be achieved post-hoc with deterministic refinement, which does not require additional resources or training, but may not achieve the same accuracy as learned refinement.

Type:

bool

class sleap.nn.config.model.UNetConfig(stem_stride: int | None = None, max_stride: int = 16, output_stride: int = 1, filters: int = 64, filters_rate: float = 2, middle_block: bool = True, up_interpolate: bool = False, stacks: int = 1)[source]#

UNet backbone configuration.

stem_stride#

If not None, controls how many stem blocks to use for initial downsampling. These are useful for learned downsampling that is able to retain spatial information while reducing large input image sizes.

Type:

int | None

max_stride#

Determines the number of downsampling blocks in the network, increasing receptive field size at the cost of network size.

Type:

int

output_stride#

Determines the number of upsampling blocks in the network.

Type:

int

filters#

Base number of filters in the network.

Type:

int

filters_rate#

Factor to scale the number of filters by at each block.

Type:

float

middle_block#

If True, add an intermediate block between the downsampling and upsampling branch for additional processing for features at the largest receptive field size. This will not introduce an extra pooling step.

Type:

bool

up_interpolate#

If True, use bilinear upsampling instead of transposed convolutions for upsampling. This can save computations but may lower overall accuracy.

Type:

bool

stacks#

Number of repeated stacks of the network (excluding the stem).

Type:

int

class sleap.nn.config.model.UpsamplingConfig(method: str = 'interpolation', skip_connections: str | None = None, block_stride: int = 2, filters: int = 64, filters_rate: float = 1, refine_convs: int = 2, batch_norm: bool = True, transposed_conv_kernel_size: int = 4)[source]#

Upsampling stack configuration.

method#

If “transposed_conv”, use a strided transposed convolution to perform learnable upsampling. If “interpolation”, bilinear upsampling will be used instead.

Type:

str

skip_connections#

If “add”, incoming feature tensors form skip connection with upsampled features via element-wise addition. Height/width are matched via stride and a 1x1 linear conv is applied if the channel counts do no match up. If “concatenate”, the skip connection is formed via channel-wise concatenation. If None, skip connections will not be formed.

Type:

str | None

block_stride#

The striding of the upsampling layer (not tensor). This is typically set to 2, such that the tensor doubles in size with each upsampling step, but can be set higher to upsample to the desired output_stride directly in fewer steps.

Type:

int

filters#

Integer that specifies the base number of filters in each convolution layer. This will be scaled by the filters_rate at every upsampling step.

Type:

int

filters_rate#

Factor to scale the number of filters in the convolution layers after each upsampling step. If set to 1, the number of filters won’t change.

Type:

float

refine_convs#

If greater than 0, specifies the number of 3x3 convolutions that will be applied after the upsampling step for refinement. These layers can serve the purpose of “mixing” the skip connection fused features, or to refine the current feature map after upsampling, which can help to prevent aliasing and checkerboard effects. If 0, no additional convolutions will be applied.

Type:

int

conv_batchnorm#

Specifies whether batch norm should be applied after each convolution (and before the ReLU activation).

transposed_conv_kernel_size#

Size of the kernel for the transposed convolution. No effect if bilinear upsampling is used.

Type:

int